It is recommended to assign a static IP address on the AP so that it does not change. In a browser address bar type the AP IP address, using either the IP address that you set manually, or the one assigned to the AP by the main router. If you need to further configure the AP (to change wireless settings for example), connect your computer to the network. The following features will be unavailable once the router is in AP mode: Note: If the router is in Access Point mode, you will notice that most of its router features are greyed out. If you go back to the AP router user interface, you will see that it is now operating in Access Point mode.Once successfully connected, you will see a webpage confirming that the setup is successful and the AP is now online.The AP router will automatically reboot and return to the screen displaying the wireless settings of the main router as shown below:.To avoid IP conflicts, use an IP that is not assigned to the devices using the main router. Note: If you want to set a static IP on the AP, select Use fixed IP Address and type the IP Address, IP Subnet Mask, Gateway IP Address, Primary DNS, and Secondary DNS. On the next page, select Get IP Address dynamically from existing router and click Next.Once the main router is detected, it will give you two options.
#Set up a new password for my belkins router settings page Pc#
Plug your PC directly into the DD-WRT router via a LAN connection. NETGEAR genie will detect the other existing router on the network. To set up the router as an extender and a wired-to-wireless bridge, just follow these steps: 1. Note: If the main router IP address is set to 192.168.1.1, the AP router will automatically change its IP address to 10.0.0.1. Access the AP router web interface using a computer that is connected to one of the LAN ports of the NETGEAR router.Use an Ethernet cable to connect the AP router internet port to a LAN port on the existing main router:.Note: If you are setting up a Nighthawk router for the first time and wish to use AP mode, see I’m setting up my Nighthawk router for the first time, how do I set it to Access Point (AP) mode? Extend your network using another router.If you already have a router and want to add an AP router to the network.
0 kommentar(er)
